Toucan is an innovative touchscreen display unit that connects via CANbus to a wide range of aftermarket ECU's, offering users a wide variety of gauge displays, customisable audio and visual alarms, as well as peak and dynamic markers.
The Toucan has four main gauge pages provided, with each page being totally configurable to show your preffered gauge selection. A quick touch on any of the small gauge causes a full-screen gauge to be displayed.
Alarms can be individually enabled for each parameter, with the alarm thresholds set as required. A low oil temperature warning can be enabled, especially important for turbocharged engines to avoid driving hard when the oil’s too cold. If an alarm is triggered, the relevant gauge can be configured to automatically display in full-screen.
When used with an AlcaTek, Link, Vi-PEC or MoTeC ecus, launch control and antilag can be turned on and off directly from the touchscreen, and the launch RPM may also be adjusted from the screen for AlcaTek and MoTeC ecus. For Syvecs the launch control status is displayed and ALS can be turned on/off.
Gauges will only be displayed when relevant sensors are wired to the ECU. All avaialble info fed to the ECU can be displayed on a 'list' mode to quickly check values in a non-graphical table.
The display is a full-colour TFT LCD with 320×240 pixels and a resistive touchscreen. Backlight dimming for night time use can be manually selected, and/or automatically enabled if the unit is wired to the vehicles “illumination” circuit.
Toucan is intended for permanent or semi-permanet installation, and is supplied with your choice of 3 mounts; articulated shallow mounts, permanant swivel mount or air vent mount.See Less...